Loading the log dump car
P
repare the car for its load by pressing down the cradle or tray on top of the car until it locks
in the horizontal position. Place the logs in the cradle or pour the coal into the tray, and
your car is ready for action. Refer to Figure 10.
31
Figure 10. Tray and cradle locations
Cradle
Unloading the log dump car
B
efore you unload the car, install a Remote-Control Track section (available separately,
6-65149 or 6-12746 for O-27 gauge; 6-65530 for O gauge; and 6-12020 or 6-12054 for
FasTrack layouts) . Refer to the track section’s instructions. Also, position the bin included with
the car next to the Remote-Control Track section. Be sure that the bin is placed on the side of the
track to which the car will empty.
To unload the car, simply position the plunger, centered on the underside of the car, directly
above the magnetic coil in the center of the Remote-Control Track section and press UNCOUPLE
on the track section’s controller.
Plunger
Maintaining and servicing your set
Summary of Contents for 2269W B & O Diesel Freight
Page 39: ...Notes 39 ...
