manualshive.com logo in svg

Linn Kremlin, Owner'S Manual, Page: 22 / 25

Share
Download
Linn Kremlin Owner'S Manual Download Page 22

22

This product is guaranteed under the conditions that apply in the country of purchase.

In addition to any statutory rights the customer may have, we undertake to replace any
parts that have failed due to faulty manufacture.

To help us serve you better in the future please return your completed warranty/
registration card to Linn or your national distributor. This will enable us to provide you
with relevant product upgrade information and other news from Linn.

WARNING

    Refer all enquiries to authorised dealers only. Unauthorised servicing or

dismantling of the product invalidates the Linn warranty.

If you are in any doubt, please contact your nearest Linn dealer. For information on
your nearest dealer, contact the Linn factory in Scotland or your national distributor.

IMPORTANT

Please keep a copy of the sales receipt to establish the purchase date of the product.

Please ensure that your equipment is insured by you during any transit or shipment for
repair.

LINN PRODUCTS LIMITED, FLOORS ROAD, WATERFOOT, EAGLESHAM,

GLASGOW G76 OEP, SCOTLAND.  TELEPHONE: ++44 (0)141 307 7777.

FACSIMILE: ++44 (0)141 644 4262.

GUARANTEE AND SERVICE

Summary of Contents for Kremlin


























Reviews:

No comments