10
The KREMLIN tuner has connectors for both an aerial installation and a cable system:
AERIAL CONNECTION The aerial connector on the KREMLIN tuner is a standard
co-axial F-type. If the lead from your aerial is fitted with this type of plug, simply screw
the plug into the socket on the tuner until the connection is secure but not overtight.
If your aerial lead does not have an F-type plug, remove the existing plug from the lead
and fit the plug supplied as shown below:
Remove 19mm of the outer sleeve from the end of the cable.
Remove 13mm of the copper shroud and inner sleeve
from the end of the cable.
Fold back the copper shroud over the outer sleeve and twist it
round in a clockwise direction.
Remove the section of the inner sleeve back to 2mm from the end
of the copper shroud.
Insert the cable into the 'F' type connector whilst twisting the connector in a clockwise
direction, until the connector is tight - do not overtighten.
The KREMLIN tuner can power an external aerial amplifier should this be required in
areas of poor signal reception. For details of how to switch on the internal power
supply, please see the USER SELECTABLE OPTIONS section.
NOTE An aerial amplifier should never be used as a substitute for a good aerial
installation.
CONNECTION