19
on the power supply when the CABLE input is selected. Option 3 turns on the power
supply for either input. For details of the power supply voltage and maximum current,
see the SPECIFICATIONS section.
USER FUNCTION 4 (U4) Option 0 causes the scanning to stop when a station is
detected. When Option 1 is selected scanning pauses for five seconds when a station
is detected, then resumes automatically.
USER FUNCTION 5 (U5) Option 0 connects the signal from the front panel remote
control sensor to the
REMOTE OUT
socket. This allows the KREMLIN to act as a
remote control receiver for other Linn equipment, which may be in a concealed
location. In some installations this facility may not be required. If option 1 is selected
the
REMOTE IN
socket is driven only by signals connected to the socket.
To exit the user function mode, press any of the buttons
TUNE
,
SCAN
,
PRESET
or
STORE
, or wait for the mode to timeout approximately twenty seconds after the last
button press.
To restore all of the User Functions to the original factory setting, first switch off the
tuner, press and hold the
[ – ]
button and switch on the power. When the display shows
INIT, the button may be released. All User Options are then set to 0.