manualshive.com logo in svg

Linn Kremlin, Owner'S Manual, Page: 18 / 25

Share
Download
Linn Kremlin Owner'S Manual Download Page 18

18

USER SELECTABLE OPTIONS    The user can customise operational features of the
tuner to suit personal preferences.

To do this, enter the user function mode. First, switch off the tuner. Press and hold
either the  

MONO

  or the  

SIGNAL

  button and switch on the power. After a short time,

the display will show U. Keep the button pressed until the display changes to U1.

To step up or down through the user functions, press the  

MONO

  or  

SIGNAL

  buttons

respectively. The user functions are displayed as U1 - U5. The status of each function
is shown by the number on the right of the display. To step through the options for each
function, use the a or 0 button.

The table below lists the options for all of the user modes and is followed by a more
detailed description.  All options are set to 0 at the factory.

U1 0

display turns off automatically

U1 1

display remains constantly illuminated

U2 0

maintain the current display mode

U2 1

revert to the tune display mode

U2 2

revert to the scan display mode

U2 3

revert to the preset display mode

U3 0

remote amplifier power is OFF

U3 1

remote amplifier power is ON when the AERIAL input is selected

U3 2

remote amplifier power is ON when the CABLE input is selected

U3 3

remote amplifier power is ON for both AERIAL and CABLE inputs

U4 0

scanning is stopped when a station is detected

U4 1

scanning resumes five seconds after a station has been detected

U5 0

REMOTE OUT

  socket is driven by front panel remote sensor

U5 1

REMOTE IN

  socket is not driven by the front panel sensor

USER FUNCTION 1 (U1)    Option 0 turns off the display twenty seconds after the last
button press.  Select Option 1 to have the display constantly illuminated.

USER FUNCTION 2 (U2)    Option 0 maintains the display of the last operation.  The
display will default to TUNE, SCAN or PRESET mode by changing to Option 1, 2 or 3.

USER FUNCTION 3 (U3)    Option 0 turns off the power supply for a remote aerial
amplifier. Select options 1, 2 or 3 only if it is required to power an external amplifier.
Option 1 turns on the power supply when the AERIAL input is selected. Option 2 turns

ADVANCED FEATURES

Summary of Contents for Kremlin


























Reviews:

No comments