7
IR OUT 1 & 2
Infrared flasher connectors
Allow the control via the handset of auxiliary devices that accept infrared signals.
MAIN RX TX
CONNECT LED indicators
Indicate signals being transmitted between units in a CONNECT system.
ACC
KNEKT connector
For installing unit in a KNEKT system.
ROOM 1 - 4, MAIN IN
CONNECT connectors
For linking units in a CONNECT system (see
CONNECT Feature
chapter).
4
3
2
1
ROOM RX TX
CONNECT LED indicators
Indicate signals being transmitted between units in a CONNECT system.
GND, AM
AM aerial connectors.
FM AERIAL
FM aerial connector.
MONITOR OUT
S-video output
8
7
6
5
CLASSIK MOVIE SYSTEM
TITLE/BAND
IR SENSOR
SET-TOP BOX
VCR
CLASSIK MOVIE SYSTEM
TV
SPEAKERS
TO S VIDEO INPUT OF TV
S VIDEO
OUT
TO SCART SOCKET OF TV
C
onnec
ting
Connecting the CLASSIK Movie
Full details on connecting the CLASSIK Movie are contained in this section.
NOTE:
In this manual ‘TV’refers to projection TVs and monitors as well as televisions.
Connecting to a mains supply
IMPORTANT:
Do not turn on the mains supply until you have connected all other components.
Connect the CLASSIK Movie to a mains supply using the mains lead provided.
When any connections are made to speakers or a TV, the CLASSIK Movie must be
configured before they will operate correctly. This is fully explained in the
Setup Menus
chapter.
Once all relevant connections have been made, turn on the mains supply. The
symbol appears on the front panel display. This symbol means the unit is in standby
mode.
Connecting the CLASSIK Movie to other components
For the best performance, the video outputs from auxiliary sources should be connected
directly to your TV, and the audio outputs to your CLASSIK Movie – see diagram below.
If you prefer, or if your TV does not have sufficient connections, you can connect the
audio and video outputs to the CLASSIK Movie . If you have the European version of the
CLASSIK Movie you can do this by daisy-chaining your auxiliary components and having
one connection to the unit – see diagram below.
If you have the US version, you can connect the audio and video outputs from your
auxiliary sources individually to the CLASSIK Movie – see diagram below.
CLASSIK MOVIE
TITLE/BAND
IR SENSOR
GAMES CONSOLE
SET TOP BOX
VCR
CLASSIK MOVIE Di
video signals
audio signals
video signal
TV
SPEAKERS
audio signals
CLASSIK MOVIE
TITLE/BAND
IR SENSOR
GAMES CONSOLE
SET TOP BOX
VCR
CLASSIK MOVIE Di
TV
SPEAKERS
audio and video signals
audio signals
video signal
CLASSIK MOVIE
TITLE/BAND
IR SENSOR
GAMES CONSOLE
SET TOP BOX
VCR
CLASSIK MOVIE Di
TV
SPEAKERS
audio and video signals
audio signals
video signal
7
English
Summary of Contents for Classik movie system
Page 1: ...English...
Page 2: ......