9
Back panel
US version
IR OUT 1 & 2
Infrared flasher connectors
Allow the control via the handset of auxiliary devices that accept infrared signals.
MAIN RX TX
CONNECT LED indicators
Indicate signals
being transmitted
between units in a
CONNECT system.
2
1
ACC
KNEKT connector
For installing unit in a KNEKT system.
ROOM 1 - 4, MAIN IN
CONNECT connectors
For linking units in a CONNECT system (see
CONNECT Feature
chapter).
ROOM
RX TX
CONNECT LED indicators
Indicate signals being transmitted between units in a CONNECT system.
GND, AM
AM aerial connectors.
FM AERIAL
FM aerial connector.
S VIDEO OUT
For connection to a TV
that accepts an S-video signal.
S VIDEO IN
For connection from a VCR with an S-video output.
YPrPb IN & OUT
Component inputs and outputs.
CVBS IN & OUT
Composite input and output.
VOLTAGE SELECTOR
MAINS INPUT
Speaker output connectors
14
13
12
11
10
9
8
7
6
5
4
3
TO CENTRE
SPEAKER
TO RIGHT
SURROUND
SPEAKER
TO LEFT
SURROUND
SPEAKER
TO RIGHT
FRONT
SPEAKER
TO LEFT FRONT
SPEAKER
TO CENTRE
SPEAKER
TO RIGHT
SURROUND
SPEAKER
TO LEFT
SURROUND
SPEAKER
TO RIGHT
FRONT
SPEAKER
TO LEFT FRONT
SPEAKER
TO ACTIVE SUBWOOFER
-
+
LEFT AUDIO OUTPUT
TO TAPE RECORDER
LEFT AUDIO OUTPUT
FROM TAPE RECORDER
RIGHT AUDIO OUTPUT
TO TAPE RECORDER
RIGHT AUDIO OUTPUT
FROM TAPE RECORDER
TO POWER AMP INPUTS
TO POWER AMP INPUTS
TO POWER AMP
OR ACTIVE SUBWOOFER
C
onnec
ting
If your TV/display device does not have an S-video or YCrCb/YUV input sockets, connect
the Classik Movie to the TV/display device as shown.
NOTES:
Ensure your TV/display device is set to
accept either a Composite, S-video or
YCrCb/YUV input. If your TV/display
evice is set to accept an RGB signal it
will not display a picture from the
Classik Movie.
If you do not wish to hear the audio
signal from the Classik Movie
through your TV/display device, do
not connect the R TO TV and L TO TV outputs.
Connecting to a VCR
(European version)
Connecting the CLASSIK Movie to your VCR depends on the connections available on
the VCR. See your VCR’s instruction booklet for guidance.
NOTE:
Do not have two different sources connected to the S VIDEO IN and VCR SCART sockets
at the same time.
FROM S VIDEO OUTPUT ON VCR
FROM VCR SCART SOCKET
OR
S VIDEO
OUT
FROM S VIDEO OUTPUT ON VCR
COMPOSITE
OUTPUT
FROM VCR
RIGHT AUDIO
OUTPUT
TO VCR
LEFT AUDIO
OUTPUT
TO VCR
RIGHT AUDIO
OUTPUT
FROM VCR
LEFT AUDIO
OUTPUT
FROM VCR
S VIDEO
OUT
OR
CVBS
IN
Connecting to a VCR
(US version)
Connecting the CLASSIK Movie to your VCR depends on the connections available on
the VCR. See your VCR’s instruction booklet for guidance.
Connecting to an external power amplifier
If you are using an external power amplifier to feed audio signals to your speakers,
follow the diagram below.
TO POWER AMP INPUTS
TO POWER AMP INPUTS
TO POWER AMP
OR ACTIVE SUBWOOFER
English
9
COMPOSITE OUTPUT TO
TV/DISPLAY DEVICE
RIGHT AUDIO
OUTPUT
TO TV
LEFT AUDIO
OUTPUT
TO TV
RIGHT AUDIO
OUTPUT
FROM TV
LEFT AUDIO
OUTPUT
FROM TV
CVBS OUT
Y
Cr
CVBS OUT
Cb
R FROM TV
L FROM TV
R TO TV
L TO TV
TV
Summary of Contents for Classik movie system
Page 1: ...English...
Page 2: ......