Linksys WRT54G3G-ST User Manual Download

Page: 56 / 132

Chapter 7: Setting up the Wireless-G Router for Broadband WAN and Mobile Broadband Ser-
vice

Wireless-G Router for Mobile Broadband

Static IP

IP Address

- Enter the IP address provided by your ISP.

Subnet Mask

- Enter the Subnet Mask provided by your ISP.

Gateway

- Enter the Gateway IP address provided by your ISP.

DNS 1-2

- Enter the DNS (Domain Name System) server IP address(es) provided by your ISP. You need to enter

at least one DNS address.

Click the

Next

button to continue.

12. The Setup Wizard will ask you to review your settings before it saves them. Click the

Yes

button if you are

satisfied with your settings, or click the

button if you do not want to save the new settings.

Figure 7-12: Enter Static IP Address Settings Screen

Figure 7-13: Confirm New Settings Screen

Summary of Contents for WRT54G3G-ST





































































































































Search results

Summary of Contents for WRT54G3G-ST

Reviews:

Related manuals for WRT54G3G-ST

Brands by name

Popular brands

Linksys WRT54G3G-ST, User Manual

Search results

Summary of Contents for WRT54G3G-ST

Reviews:

Related manuals for WRT54G3G-ST

Brands by name

Popular brands