32
Chapter 6: Setting up the Wireless-G Router for Broadband WAN Service Only
Using the Setup Wizard
Wireless-G Router for Mobile Broadband
10. Select the Internet connection type you use:
Cable (DHCP)
,
DSL (PPPoE)
, or
Static IP
. Proceed to the
appropriate section for your Internet connection type.
Cable (DHCP)
Click the
Next
button.
DSL (PPPoE)
User Name
- Enter the User Name provided by your ISP.
Password
- Enter the Password provided by your ISP.
Confirm
- To confirm the Password, enter it again in this field.
Click the
Next
button to continue.
Figure 6-9: Configure Cable or DHCP Settings Screen
Figure 6-10: Configure DSL (PPPoE) Settings Screen
NOTE:
If the Internet connection type you use is not listed here, keep the default,
Cable (DHCP)
for now, and click the
Next
button. After you have completed the Setup Wizard, go to “Chapter 8:
Configuring the Wireless-G Router for Mobile Broadband.” You will use the Router’s Web-based
Utility to configure the Internet connection type settings.
Summary of Contents for WRT54G3G-ST
Page 128: ...119 Appendix I Regulatory Information Wireless G Router for Mobile Broadband...
Page 129: ...120 Appendix I Regulatory Information Wireless G Router for Mobile Broadband...
Page 130: ...121 Appendix I Regulatory Information Wireless G Router for Mobile Broadband...
Page 131: ...122 Appendix I Regulatory Information Wireless G Router for Mobile Broadband...
