Linksys WIP310 - iPhone Wireless VoIP Phone User Manual Download Page 70 | Manualshive

Page: 70 / 86

background image

Wireless-G IP Phone

63

Appendix E: Regulatory Information

Appendix E: Regulatory Information

FCC Statement

This product has been tested and complies with the specifications for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used according to the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which is found
by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•

Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this
equipment.

IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating
instructions for satisfying RF exposure compliance.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
This equipment has been SAR-evaluated. The Maximum average SAR(1g) test value is 1.490W/kg.
Linksys declares that WIP310 (FCC ID: Q87-WIP310) is limited in CH1~CH11 for 2.4 GHz by specified firmware controlled in U.S.A.

«
...
68
69
70
71
72
...
»

Summary of Contents for WIP310 - iPhone Wireless VoIP Phone























































































Reviews:

No comments

Related manuals for WIP310 - iPhone Wireless VoIP Phone

Brand: Neoi Pages: 40

Brand: Audiovox Pages: 18

Brand: i-mobile Pages: 99

Brand: Polycom Pages: 2

Brand: Alcatel Pages: 29

Brand: FLY Pages: 91

8800 - SMARTPHONE - SAFETY AND

Brand: Blackberry Pages: 8

Brand: Evolveo Pages: 23

Brand: Sonim Pages: 89

Brand: V7 Pages: 20

Brand: Pantech Wireless Pages: 71

Brand: Sony Ericsson Pages: 80

Brand: Samsung Pages: 158

Brand: Samsung Pages: 179

Brand: Samsung Pages: 159

Brand: Samsung Pages: 162

Brand: Haier Pages: 43

Brand: Haier Pages: 13

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands