Linksys WIP310 - iPhone Wireless VoIP Phone User Manual Download Page 38

Page: 38 / 86

Wireless-G IP Phone

Chapter 4: Configuring the Wireless-G IP Phone
Tools

Tools

Use the Tools menu to view information about your IP Phone and network status.

Option

Description

Signal Quality

Provides wireless network information including signal quality and data rate.

Site Survey

Displays a list of access points that are available for your phone to connect to. Select the

Navigation

button to access status information about each access point. Select the

Renew

Soft Key to update the survey results.

Statistics

Displays the Phone’s network usage statistics.

Battery

View the Phone’s battery status.

Ping

Lets you enter an IP address and ping another device.

Version

Displays information about the Phone, including firmware version, when it was built, and
how much memory it contains.

Upgrade

Upgrade the IP Phone’s firmware.

Back to
Default

Reset all of the Phone’s settings back to their factory defaults.

Restart

Soft reset of the Phone.

Summary of Contents for WIP310 - iPhone Wireless VoIP Phone























































































Search results

Summary of Contents for WIP310 - iPhone Wireless VoIP Phone

Reviews:

Related manuals for WIP310 - iPhone Wireless VoIP Phone

Brands by name

Popular brands

Linksys WIP310 - iPhone Wireless VoIP Phone, User Manual

Search results

Summary of Contents for WIP310 - iPhone Wireless VoIP Phone

Reviews:

Related manuals for WIP310 - iPhone Wireless VoIP Phone

Brands by name

Popular brands