Linksys WIP310 - iPhone Wireless VoIP Phone User Manual Download Page 25

Page: 25 / 86

Wireless-G IP Phone

Chapter 4: Configuring the Wireless-G IP Phone

E-mail

The IP Phone’s built-in e-mail client allows you to send and receive messages using your POP3 e-mail account.

Configuring Your Account

1. If necessary, press the

Menu

Soft Key, scroll to

E-mail

, then press the

Navigation

button to enter the E-mail menu.

If an e-mail account has not been configured, you see the

New

account menu.

2. Enter the information provided by your e-mail service.

3. When you have finished configuring your e-mail account information, press the

Back

Soft Key until you see the

Option

menu.

4. Scroll to

Activate

, press the

Navigation

button, then press the

Soft Key to activate the e-mail account. When an e-mail account is already configured,

access the

Option

menu by selecting

Account Settings

from the

E-mail

main menu. Then select the account and and select the

Option

Soft Key.

5. Press the

Back

Soft Key until you see the

E-mail

menu.

Using the E-mail Client

Refer to the table below for a list of options available in the E-mail menu:

Note:

Not all e-mail services support POP3. Contact your e-mail service provider for more information about POP3 settings and support.

Option

Description

Write New

Compose a new e-mail message. Press the

Navigation

button to create a new e-mail message,

then enter a

Subject

, the

Recipients

, and

Content

of the message. When you are finished editing

your e-mail, select

Send Mail

Save To Draft

to save the message to the draft folder.

Summary of Contents for WIP310 - iPhone Wireless VoIP Phone























































































Search results

Summary of Contents for WIP310 - iPhone Wireless VoIP Phone

Reviews:

Related manuals for WIP310 - iPhone Wireless VoIP Phone

Brands by name

Popular brands

Linksys WIP310 - iPhone Wireless VoIP Phone, User Manual

Search results

Summary of Contents for WIP310 - iPhone Wireless VoIP Phone

Reviews:

Related manuals for WIP310 - iPhone Wireless VoIP Phone

Brands by name

Popular brands