39
Chapter 6: Configuring the Wireless-G Access Point
The Administration - Log Tab
Wireless-G Access Point
The Administration - Log Tab
On this screen you can configure the log settings.
Management
You can have logs that keep track of the Access Point’s activities.
Log
To enable the Log support feature, select
Enabled
. Otherwise, select
Disabled
.
Logviewer IP Address
. If you have chosen to monitor the Access Point’s traffic, then you can designate a PC that
will receive permanent log files periodically. In the field provided, enter the IP address of this PC. To view these
permanent logs, you must use Logviewer software, which can be downloaded free of charge from
www.linksys.com/international
.
View Log
. To see a temporary log of the Access Point’s most recent activities, click this button.
On the
View Log
screen, click the
First Page
button to see the first page of log entries. Click the
Last Page
button
to see the last page of log entries. Click the
Previous Page
button to see the previous page of log entries, and
click the
Next Page
button to see the next page of log entries. To delete all log entries, click the
Clear Log
button. To update the log with the most recent activities, click the
Refresh
button.
Change these settings as described here and click
Save Settings
to apply your changes, or click
Cancel
Changes
to cancel your changes. Click
Help
for more information.
Figure 6-24: View Log Screen
Figure 6-23: Administration - Log Screen
