Linksys WAP4410N User Manual Download Page 19

Page: 19 / 87

WAP4410N User Guide 14

Navigating the Utility

Setting Up the Wireless-N Access Point

Administration

You will use the Administration tabs to manage the Access Point.

•

Management

—This screen allows you to customize the password and Simple Network

Management Protocol (SNMP) settings.

•

Log

—Configure the Log settings for the Access Point on this screen.

•

Diagnostic

—Use this to perform a

Ping

. The activities can be useful in solving network

problems.

•

Factory Default

—Use this screen to reset the Access Point to its factory default

settings.

•

Firmware Upgrade

—Upgrade the Access Point’s firmware on this screen.

•

Reboot

—Use this screen to reboot the Access Point.

•

Config Management

—You can save the configuration file for the Access Point to your

PC, as well as restore the backup configuration file to the Access Point.

Status

You will be able to view status information for your local network, wireless networks, and
network performance.

•

Local Network

—This screen displays system information, including software &

hardware version, MAC address, and IP address on the LAN side of the Access Point.

•

Wireless

—This screen displays wireless network settings including SSID, network mode,

priority setting, VLAN trunk, and wireless channel.

•

System Performance

—This screen displays the current traffic statistics of this Access

Point for both Wireless and LAN ports.

Summary of Contents for WAP4410N
























































































Search results

Summary of Contents for WAP4410N

Reviews:

Related manuals for WAP4410N

Brands by name

Popular brands

Linksys WAP4410N, User Manual

Search results

Summary of Contents for WAP4410N

Reviews:

Related manuals for WAP4410N

Brands by name

Popular brands