Linksys WAP4410N User Manual Download Page 11

Page: 11 / 87

WAP4410N User Guide 6

The LEDs

Getting to Know the Wireless-G Exterior Access Point

Getting to Know the Wireless-G Exterior
Access Point

This chapter provides you with information about the external characteristics of the Access
Point.

The LEDs

The Access Point's LEDs, where information about network activity is displayed, are located on
the front panel.

Power—

Green. Lights up when the Access Point is powered on.

PoE—

Green. Lights up when the Access Point is powered through Ethernet cable.

WIRELESS

—Green. Lights up when the Access Point is successfully connected to a wireless

device. If the Wireless LED is flashing, the Access Point is actively sending to or receiving data
from a wireless device.

ETHERNET

—Green. Lights up when the Access Point is successfully connected to a device

through the Ethernet network port. If the ETHERNET LED is flashing, the Access Point is actively
sending to or receiving data from one of the devices over the Ethernet network port.

Summary of Contents for WAP4410N
























































































Search results

Summary of Contents for WAP4410N

Reviews:

Related manuals for WAP4410N

Brands by name

Popular brands

Linksys WAP4410N, User Manual

Search results

Summary of Contents for WAP4410N

Reviews:

Related manuals for WAP4410N

Brands by name

Popular brands