Linksys WAP4410N User Manual Download Page 43

Page: 43 / 87

WAP4410N User Guide 38

The Administration - Config Management Tab

Configuring the Wireless-N Access Point

The Administration - Config Management Tab

On this screen you can create a backup configuration file or save a configuration file to the
Access Point.

Config Management

Use this screen to upload or download configuration files for the Access Point.

•

Save Configuration

—To save a backup configuration file on a computer, click the

Save

Configuration to File

button and follow the on-screen instructions.

•

Restore Configuration

—To upload a configuration file to the Access Point, enter the

location of the configuration file in the field provided, or click the

Browse

button to find

the file. Then click the

Load

button.

Help information is displayed on the right-hand side of the screen.

Summary of Contents for WAP4410N
























































































Search results

Summary of Contents for WAP4410N

Reviews:

Related manuals for WAP4410N

Brands by name

Popular brands

Linksys WAP4410N, User Manual

Search results

Summary of Contents for WAP4410N

Reviews:

Related manuals for WAP4410N

Brands by name

Popular brands