29
Chapter 5: Using the Web-based Utility for Configuration
Setup Tab - Network Settings
WebView Switches
PoE Information
Maximum Available Power
. Indicates the maximum amount of power the device can supply.
System Operation Status
. Indicates whether the PoE function is on or off.
Main Power Consumption
. Displays how much power is currently used.
Setup Tab - Network Settings
The
Network Settings
screen allows you to assign DHCP or static IP settings to interfaces and assign default
gateways.
Identification
System Name
. This field allows you to assign a system name.
System Location
. This field is used for entering a description of where the Switch is located, such as 3rd floor.
System Contact
. Enter the administrative contact person in this field.
System Object ID
. The system object identifier is displayed here.
Base MAC Address
. This is the MAC address of the Switch.
IP Configuration
Management VLAN
. This drop-down allows you to select the Management VLAN.
IP Address Mode
. This drop-down allows you to select Static or Dynamic IP address configuration.
Host Name
. Enter the DHCP Host Name here.
IP Address
. If using a static IP address, enter the IP address here.
Subnet Mask
. Enter the subnet mask of the currently configured IP address.
Default Gateway
. Enter the IP address of the Default Gateway.
Figure 5-3: Setup - Network Settings
NOTE:
The
PoE Information
only appears on the summary screen of the SRW2008P and
SRW2008MP.
