25
Chapter 4: Using the Console Interface for Configuration
Configuring the Switch through the Console Interface
WebView Switches
File Management
The
File Management
screen allows you to upload or download files, such as the startup configuration, boot, or
image file, using a TFTP server.
Select
Edit
to change the settings. When your changes are complete, press the
Esc
key to return to the
Action
menu, and select
Execute
to upload or download the designated file.
If you are downloading a new boot image, please follow these steps:
1. Download the new boot code. DO NOT RESET THE DEVICE!
2. Download the new software image.
3. Reset the device now.
Restore System Default Settings
To restore the Switch back to the factory default settings, select
Restore System Default Settings
and press
the
Enter
key. You will be asked if you want to continue. Press the
y
key to restore the Switch’s default settings,
or press the
n
key to cancel.
Reboot System
Select
Reboot System
and press the
Enter
key if you want to restart the Switch. You will be asked if you want to
continue. Press the
y
key to reboot the Switch, or press the
n
key to cancel. After the Switch has rebooted, the
Switch Main Menu
screen will appear.
Back to main menu
Select
Back to main menu
and press the
Enter
key if you want to return to the
Switch Main Menu
screen.
Figure 4-31: Restore System Default Settings
Figure 4-30: File Management
Figure 4-32: Reboot System
NOTE:
When downloading a configuration file, be sure that it is a valid configuration file.
If you have edited the file, ensure that only valid entries have been configured.
