23
Chapter 4: Using the Console Interface for Configuration
Configuring the Switch through the Console Interface
WebView Switches
The Switch’s IP information is displayed here.
IP Address
. The IP Address of the Switch is displayed. (The default IP address is
192.168.1.254
.) Verify that the
address you enter is correct and does not conflict with another device on the network.
Subnet Mask
. The subnet mask of the Switch is displayed.
Default Gateway
. The IP address of your network’s default gateway is displayed.
Management VLAN
. The VLAN ID number is displayed.
DHCP client
. The status of the DHCP client is displayed. If you want the Switch to be a DHCP client, then select
ENABLE
. If you want to assign an static IP address to the Switch, then enter the IP settings and select
DISABLE
.
Select
Edit
to make changes. When your changes are complete, press the
Esc
key to return to the
Action
menu,
and select
Save
to save your changes.
HTTP
The
HTTP
screen displays the status and port number of the HTTP Server.
Select
Edit
and press the
Enter
key to make changes. When your changes are complete, press the
Esc
key to
return to the
Action
menu. Select
Save
and press the
Enter
key to save your changes. To exit, select
Quit
and
press the
Enter
key.
HTTPS Configuration
Use the
HTTPS Configuration
screen to configure HTTPS settings. You can enable or disable the HTTPS server
and configure the port on which the session is enabled.
Select
Edit
and press the
Enter
key to make changes. When your changes are complete, press the
Esc
key to
return to the
Action
menu. Select
Save
and press the
Enter
key to save your changes. To exit, select
Quit
and
press the
Enter
key.
Figure 4-24: IP Address Configuration
Figure 4-25: HTTP
Figure 4-26: HTTPS Configuration
