manualshive.com logo in svg

Linksys RTP300 - Broadband Router With 2 Phone Ports, Administration Manual

The Linksys RTP300 Broadband Router With 2 Phone Ports is a reliable and efficient networking device. With its Quick Installation Manual, users can easily set up and configure their router. For a hassle-free experience, simply visit our website to download the manual for free and get started with your Linksys RTP300.

Share
Download
background image

Linksys ATA Administration Guide

189

Power Safety Information

Power Safety Information

WARNING: Local National Electrical Codes

Installation of the equipment must comply with 
local and national electrical codes. 

WARNING: Product Disposal

Ultimate disposal of this product should be handled 
according to all national laws and regulations.

WARNING: TN Power

The device is designed to work with TN power 
systems.

WARNING: Warning Ground Conductor Warning

Never defeat the ground conductor or operate the 
equipment in the absence of a suitably installed 
ground conductor. Contact the appropriate 
electrical inspection authority or an electrician if you 
are uncertain that suitable grounding is available.

WARNING: Power Supply Installation Warning

The power supply must be placed indoors.

WARNING: Circuit Breaker

This product relies on the building’s installation for 
short-circuit (overcurrent) protection. Ensure that 
the protective device is rated not greater than: 120 
VAC, 15A U.S. (240 VAC, 10A international)

WARNING: Warning Main Disconnecting Device

The plug-socket combination must be accessible at 
all times, because it serves as the main 
disconnecting device.

Summary of Contents for RTP300 - Broadband Router With 2 Phone Ports










































































































































































































Reviews:

No comments

Related manuals for RTP300 - Broadband Router With 2 Phone Ports

Paradyne 6501 Quick Installation preview
6501
Brand: Paradyne Pages: 1
CICH International EzCast M2 Manual preview
EzCast M2
Brand: CICH International Pages: 7
VOLTCRAFT 2258704 Operating Instructions preview
2258704
Brand: VOLTCRAFT Pages: 4
Teletronics International EZLoop 21-110 Quick Product Manual preview
EZLoop 21-110
Brand: Teletronics International Pages: 2
Ralink RT3290 User Manual preview
RT3290
Brand: Ralink Pages: 36
Transition Networks CPSMM-120 User Manual preview
CPSMM-120
Brand: Transition Networks Pages: 5
Zonet ZEW2542 User Manual preview
ZEW2542
Brand: Zonet Pages: 32
Asus WL-106g Quick Start Manual preview
WL-106g
Brand: Asus Pages: 10
Askey WLU5022(RoHS) Quick Setup Manual preview
WLU5022(RoHS)
Brand: Askey Pages: 3
ATTO Technology R30F Specifications preview
R30F
Brand: ATTO Technology Pages: 2
Belkin F5D7051 User Manual preview
F5D7051
Brand: Belkin Pages: 44
D-Link DHD-131 Brochure & Specs preview
DHD-131
Brand: D-Link Pages: 2
D-Link DHP-312 Quick Installation Manual preview
DHP-312
Brand: D-Link Pages: 24
D-Link DHP-306AV User Manual preview
DHP-306AV
Brand: D-Link Pages: 82
D-Link DHP-209AV User Manual preview
DHP-209AV
Brand: D-Link Pages: 23
D-Link DHP-303 - PowerLine HD EN Starter User Manual preview
DHP-303 - PowerLine HD EN Starter
Brand: D-Link Pages: 29
D-Link DGE-660TD Quick Installation Manual preview
DGE-660TD
Brand: D-Link Pages: 28
D-Link DHN-120 User Manual preview
DHN-120
Brand: D-Link Pages: 49

Brands by name

Popular brands

Load more brands