![background image](http://html.mh-extra.com/html/linksys/rtp300-broadband-router-with-2-phone-ports/rtp300-broadband-router-with-2-phone-ports_administration-manual_1923888130.webp)
Linksys ATA Administration Guide
130
Line page
Voice tab > Line page >
Subscriber Information section
Voice tab > Line page >
Supplementary Service Subscription section
The ATA device provides native support of a large set of enhanced or supplementary services.
All of these services are optional. The parameters listed in the following table are used to
enable or disable a specific supplementary service. A supplementary service should be
disabled if a) the user has not subscribed for it, or b) the Service Provider intends to support
similar service using other means than relying on the ATA device.
Field
Description
Display Name
Display name for caller ID.
User ID
Extension number for this line.
Password
Password for this line.
Use Auth ID
To use the authentication ID and password for SIP authentication, select yes.
Otherwise, select no to use the user ID and password.
The default is
no
.
Auth ID
Authentication ID for SIP authentication.
Directory Number
Enter the number for this line.
Call Capacity
Maximum number of calls allowed on this line interface. Choices:
{unlimited,1,2,3,…25 }. Default is
16
. Note that the the ATA device does not
distinguish between incoming and outgoing calls when talking about call
capacity. Note: unlimited = 16
Cfwd No Ans Delay
Delay, in seconds, before the call forwarding of no-answer calls
feature is triggered.
The default is
20
.
Mini Certificate
Base64 encoded of Mini-Certificate concatenated with the 1024-bit public
key of the CA signing the MC of all subscribers in the group.
The default is empty.
SRTP Private Key
Base64 encoded of the 512-bit private key per subscriber for establishment
of a secure call.
The default is empty.
Field
Description
Call Waiting Serv
Enable Call Waiting Service.
The default is
yes
.
Block CID Serv
Enable Block Caller ID Service.
The default is
yes
.
Block ANC Serv
Enable Block Anonymous Calls Service
The default is
yes
.
Dist Ring Serv
Enable Distinctive Ringing Service
The default is
yes
.