manualshive.com logo in svg

Linksys RTP300 - Broadband Router With 2 Phone Ports, Administration Manual

The Linksys RTP300 Broadband Router With 2 Phone Ports is a reliable and efficient networking device. With its Quick Installation Manual, users can easily set up and configure their router. For a hassle-free experience, simply visit our website to download the manual for free and get started with your Linksys RTP300.

Share
Download
background image

Linksys ATA Administration Guide

16

Comparison of ATA Devices

Introducing Linksys Analog Telephone Adapters

Comparison of ATA Devices

Each Linksys ATA device is an intelligent low-density Voice over IP (VoIP) gateway that enables 
carrier-class residential and business IP Telephony services delivered over broadband or high-
speed Internet connections. A Linksys ATA device maintains the state of each call it terminates 
and makes the proper reaction to user input events (such as on/off hook or hook flash). The 
Linksys ATA devices use the Session Initiation Protocol (SIP) open standard so there is little or no 
involvement by a “middle-man” server or media gateway controller. SIP allows interoperation 
with all ITSPs that support SIP. 

The following table summarizes the ports and features provided by the Linksys ATA devices 
described in this document.

NOTE: 

The information contained in this guide is not a warranty from Linksys, a division of 

Cisco Systems, Inc. Customers planning to use Linksys ATA devices in a VoIP service deployment 
are advised to test all functionality they plan to support before putting the Linksys ATA device 
in service.  By implementing Linksys ATA devices with the SIP protocol, intelligent endpoints at 
the edges of a network perform the bulk of the call processing. This allows the deployment of a 
large network with thousands of subscribers without complicated, expensive servers.

Product 
Name

FXS 
(Analog 
Phone) 

FXO 
PSTN 
Connect-
ion

RJ-45
Internet 
(WAN) 

RJ-45
Ethernet 
(LAN) 

Configurable 
Voice Lines

Description

PAP2T

2

—

1

—

 

2

Voice  adapter  with  two 
FXS ports.

SPA2102

2

—

1

 

1

2

Voice  adapter  with 
router.

SPA3102

1

1

1

 

1

1

Voice  adapter  with 
router and PSTN 
connectivity.

SPA8000

8

—

1

Maintenance 
only

8

Voice  adapter  with 
support for up to eight 
FXS devices. Supports 
SIP Trunking for inbound 
call routing to trunk 
groups.

RTP300

2

—

1

4

2

IP router with two FXS 
ports. Provides ATA 
device functionality.

WRP400

2

—

1

4

2

Wireless-G IP router with 
two FXS ports. Provides 
ATA device functionality. 
Can be remotely 
provisioned.

WRTP54G
WAG54GP2

2

—

1

4

2

Wireless-G IP router with 
two FXS ports. Provides 
ATA device functionality.

AG310

1

1

1

1

1

ADSL2+ gateway with 
VoIP and PSTN 
connectivity. Provides 
ATA device functionality.

Summary of Contents for RTP300 - Broadband Router With 2 Phone Ports










































































































































































































Reviews:

No comments

Related manuals for RTP300 - Broadband Router With 2 Phone Ports

quadient iX-1 Series Replacement Manual preview
iX-1 Series
Brand: quadient Pages: 2
Quatech QSP-200/300 User Manual preview
QSP-200/300
Brand: Quatech Pages: 49
Digitus DA-70167 Quick Start Manual preview
DA-70167
Brand: Digitus Pages: 2
Hi-flying Elfin-EE1X User Manual preview
Elfin-EE1X
Brand: Hi-flying Pages: 19
Sabrent TH-3HD2 User Manual preview
TH-3HD2
Brand: Sabrent Pages: 4
Syba SD-EXP50025 User Manual preview
SD-EXP50025
Brand: Syba Pages: 2
Aeon Labs Z-Stick Series 2 Operating Instructions preview
Z-Stick Series 2
Brand: Aeon Labs Pages: 2
Problem Solvers MISMATCH IS II BRAKE TO SRAM SHIFTER/DROPPER Instructions Manual preview
MISMATCH IS II BRAKE TO SRAM SHIFTER/DROPPER
Brand: Problem Solvers Pages: 8
Zonet ZEW2508A Product Data preview
ZEW2508A
Brand: Zonet Pages: 2
IT Works CPL500W User Manual preview
CPL500W
Brand: IT Works Pages: 105
ReSound Phone Clip+ Getting Started preview
Phone Clip+
Brand: ReSound Pages: 2
Digitus DA-70325 User Manual preview
DA-70325
Brand: Digitus Pages: 7
TeleVue FoneMate SFA-0001 Manual preview
FoneMate SFA-0001
Brand: TeleVue Pages: 2
Telex IP-223 Technical Manual preview
IP-223
Brand: Telex Pages: 136
Seagate GoFlex Cinema User Manual preview
GoFlex Cinema
Brand: Seagate Pages: 58
Sena Parani-SD1000 User Manual preview
Parani-SD1000
Brand: Sena Pages: 18
Renesas SLG46538V Quick Start Manual preview
SLG46538V
Brand: Renesas Pages: 2
LevelOne WUA-0603 Specifications preview
WUA-0603
Brand: LevelOne Pages: 3

Brands by name

Popular brands

Load more brands