manualshive.com logo in svg

Linksys RTP300 - Broadband Router With 2 Phone Ports, Administration Manual

The Linksys RTP300 Broadband Router With 2 Phone Ports is a reliable and efficient networking device. With its Quick Installation Manual, users can easily set up and configure their router. For a hassle-free experience, simply visit our website to download the manual for free and get started with your Linksys RTP300.

Share
Download
background image

Linksys ATA Administration Guide

129

Line page

Use OB Proxy In 
Dialog

Whether to force SIP requests to be sent to the outbound proxy within a 
dialog. Ignored if the parameter 

Use Outbound Proxy

 is no, or the 

Outbound 

Proxy

 parameter is empty.

The default is 

yes

.

Register

Enable periodic registration with the 

Proxy

 parameter. This parameter is 

ignored if 

Proxy

 is not specified.

The default is 

yes

.

Make Call Without 
Reg

Allow making outbound calls without successful (dynamic) registration by 
the unit. If No, dial tone will not play unless registration is successful.

The default is 

no

.

Register Expires

Allow answering inbound calls without successful (dynamic) registration by 
the unit. If proxy responded to REGISTER with a smaller Expires value, the 
PAP2T will renew registration based on this smaller value instead of the 
configured value. If registration failed with an Expires too brief error 
response, the PAP2T will retry with the value given in the Min-Expires header 
in the error response.

The default is 

3600

.

Ans Call Without Reg

Expires value in sec in a REGISTER request. The PAP2T will periodically renew 
registration shortly before the current registration expired. This parameter is 
ignored if the 

Register

 parameter is no. Range: 0 – (231 – 1) sec 

Use DNS SRV

Whether to use DNS SRV lookup for Proxy and Outbound Proxy.

The default is 

no

.

DNS SRV Auto Prefix

If enabled, the PAP2T will automatically prepend the Proxy or Outbound 
Proxy name with _sip._udp when performing a DNS SRV lookup on that 
name.

The default is 

no

.

Proxy Fallback Intvl

This parameter sets the delay (sec) after which the PAP2T will retry from the 
highest priority proxy (or outbound proxy) servers after it has failed over to a 
lower priority server. This parameter is useful only if the primary and backup 
proxy server list is provided to the PAP2T via DNS SRV record lookup on the 
server name. (Using multiple DNS A record per server name does not allow 
the notion of priority and so all hosts will be considered at the same priority 
and the PAP2T will not attempt to fall back after a fail over).

The default is 

3600

Proxy Redundancy 
Method

PAP2T will make an internal list of proxies returned in DNS SRV records. In 
normal mode, this list will contain proxies ranked by weight and priority.

if Based on SRV port is configured the PAP2T does normal first, and also 
inspect the port number based on 1st proxy’s port on the list.

The default is 

Normal

.

Voice Mail Server 

Enter the URL or IP address of the server.

Mailbox Subscribe 
Expires

Expiry time to the voice mail server. The time to send another subscribe 
message to the voice mail server.

Field

Description

Summary of Contents for RTP300 - Broadband Router With 2 Phone Ports










































































































































































































Reviews:

No comments

Related manuals for RTP300 - Broadband Router With 2 Phone Ports

Bang & Olufsen BeoLink Converter NL/ML Manual preview
BeoLink Converter NL/ML
Brand: Bang & Olufsen Pages: 8
Zonet ZUB6201C User Manual preview
ZUB6201C
Brand: Zonet Pages: 62
Adaptec AVA-2902E Installation Manual preview
AVA-2902E
Brand: Adaptec Pages: 8
Buffalo AirStation WI-U2-433DM User Manual preview
AirStation WI-U2-433DM
Brand: Buffalo Pages: 29
Keysight N5192A UXG X-Series Security Features And Document Of Volatility preview
N5192A UXG X-Series
Brand: Keysight Pages: 24
WiT BLE 5.0 User Manual preview
BLE 5.0
Brand: WiT Pages: 11
SMC Networks 2208USB/ETH - annexe 1 Manual preview
2208USB/ETH - annexe 1
Brand: SMC Networks Pages: 24
LD CURV 500 SLA User Manual preview
CURV 500 SLA
Brand: LD Pages: 2
Boca Systems Webglider-460 Reference Manual preview
Webglider-460
Brand: Boca Systems Pages: 104
Alogic DCAP-SPL Quick Start Manual preview
DCAP-SPL
Brand: Alogic Pages: 2
Compaq Pavilion zx5000 - Notebook PC Hard Drive Replacement preview
Pavilion zx5000 - Notebook PC
Brand: Compaq Pages: 2
WiMi WA001 User Manual preview
WA001
Brand: WiMi Pages: 4
InnoMedia MTA 6328-24 Quick Install Manual preview
MTA 6328-24
Brand: InnoMedia Pages: 10
EDUP EP-DB1305 User Manual preview
EP-DB1305
Brand: EDUP Pages: 18
Quatech SS-BLT-100 Quick Installation Manual preview
SS-BLT-100
Brand: Quatech Pages: 1
Key Digital KD-VA5 Specifications preview
KD-VA5
Brand: Key Digital Pages: 1
Steren COM-452 Instruction Manual preview
COM-452
Brand: Steren Pages: 37
Gefen DIGAUD-2-AAUD Quick Start Manual preview
DIGAUD-2-AAUD
Brand: Gefen Pages: 2

Brands by name

Popular brands

Load more brands