Linksys RT31P2 - Broadband Router Installation And Troubleshooting Manual Download Page 36

Page: 36 / 91

Broadband Router with 2 Phone Ports

Chapter 5: Configuring the Router

The Security Tab - VPN Passthrough

The

VPN Passthrough

screen allows you to allow VPN tunnels using IPSec, PPPoE, or PPTP protocols to pass

through the Router.

VPN Passthrough

IPSec Passthrough

. IPSec (Internet Protocol Security) is a suite of protocols used to implement secure

exchange of packets at the IP layer. To allow IPSec Passthrough, click the

Enabled

button. To disable IPSec

Passthrough, click the

Disabled

button.

PPPoE Passthrough

. PPPoE (Point-to-Point over Ethernet) Passthrough allows your PC(s) to use the PPPoE

client software provided by your ISP. Some ISPs may request that you use this feature on the Router. To allow
PPPoE Passthrough, click the

Enabled

button. To disable PPPoE Passthrough, click the

Disabled

button.

PPTP Pass Through

. PPTP (Point-to-Point Tunneling Protocol) Passthrough allows the Point-to-Point (PPP) to be

tunneled through an IP network. To allow PPTP Passthrough, click the

Enabled

button. To disable PPTP

Passthrough, click the

Disabled

button.

When you have finished making changes to this screen, click the

Save Settings

button to save the changes, or

click the

Cancel Changes

button to undo your changes. Help information is shown on the right-hand side of a

screen. For additional information, click

More

Figure 5-16: Security Tab - VPN

Passthrough

ipsec

: a VPN protocol used to implement

secure exchange of packets at the IP
layer

pptp

: a VPN protocol that allows the Point

to Point Protocol (PPP) to be tunneled
through an IP network. This protocol is
also used as a type of broadband
connection in Europe

vpn

: a security measure to protect data as

it leaves one network and goes to another
over the Internet

pppoe

: A type of broadband connection

that provides authentication (username
and password) in addition to data
transport

Summary of Contents for RT31P2 - Broadband Router




























































































Search results

Summary of Contents for RT31P2 - Broadband Router

Reviews:

Related manuals for RT31P2 - Broadband Router

Brands by name

Popular brands

Linksys RT31P2 - Broadband Router, Installation And Troubleshooting Manual

Search results

Summary of Contents for RT31P2 - Broadband Router

Reviews:

Related manuals for RT31P2 - Broadband Router

Brands by name

Popular brands