Linksys RT042 - Broadband Router With QoS User Manual Download Page 36

Page: 36 / 68

Appendix A: Troubleshooting
Common Problems and Solutions

Broadband Router

For Windows 2000:

A. Click

Start

Settings

, and

Control Panel

. Double-click

Network and Dial-Up Connections

B. Right-click the

Local Area Connection

that is associated with the Ethernet adapter you are using, and

select the

Properties

option.

C. In the

Components checked are used by this connection

box, highlight

Internet Protocol (TCP/IP)

, and

click the

Properties

button. Select

Use the following IP address

option.

D. Enter a unique IP address that is not used by any other computer on the network connected to the Router.

You can only use an IP address in the ranges 192.168.1.2 to 192.168.1.99 and 192.168.1.151 to
192.168.1.254.

E. Enter the Subnet Mask,

255.255.255.0

F. Enter the Default Gateway,

192.168.1.1

(Router’s default IP address).

G. Toward the bottom of the window, select

Use the following DNS server addresses

, and enter the

Preferred DNS server and Alternative DNS server (provided by your ISP). Contact your ISP or go on its
website to find the information.

H. Click the

button in the

Internet Protocol (TCP/IP) Properties

window, and click the

button in the

Local Area Connection Properties

window.

Restart the computer if asked.

For Windows XP:

The following instructions assume you are running Windows XP with the default interface. If you are using the
Classic interface (where the icons and menus look like previous Windows versions), please follow the
instructions for Windows 2000.

A. Click

Start

and

Control Panel

B. Click the

Network and Internet Connections

icon and then the

Network Connections

icon.

C. Right-click the

Local Area Connection

that is associated with the Ethernet adapter you are using, and

select the

Properties

option.

D. In the

This connection uses the following items

box, highlight

Internet Protocol (TCP/IP)

. Click the

Properties

button.

E. Enter a unique IP address that is not used by any other computer on the network connected to the Router.

You can only use an IP address in the ranges 192.168.1.2 to 192.168.1.99 and 192.168.1.151 to
192.168.1.254.

F. Enter the Subnet Mask,

255.255.255.0

G. Enter the Default Gateway,

192.168.1.1

(Router’s default IP address).

H. Toward the bottom of the window, select

Use the following DNS server addresses

, and enter the

Preferred DNS server and Alternative DNS server (provided by your ISP). Contact your ISP or go on its
website to find the information.

Click the

button in the

Internet Protocol (TCP/IP) Properties

window. Click the

button in the

Local

Area Connection Properties

window.

Summary of Contents for RT042 - Broadband Router With QoS





































































Search results

Summary of Contents for RT042 - Broadband Router With QoS

Reviews:

Related manuals for RT042 - Broadband Router With QoS

Brands by name

Popular brands

Linksys RT042 - Broadband Router With QoS, User Manual

Search results

Summary of Contents for RT042 - Broadband Router With QoS

Reviews:

Related manuals for RT042 - Broadband Router With QoS

Brands by name

Popular brands