EtherFast
®
10/100 CardBus PC Cards
NetBEUI
Click on the Add button. Select Protocol, then click Add. Under
Manufacturer, highlight Microsoft. Under Network Protocol, highlight
NetBEUI. Click OK.
TCP/IP
Click on the Add button. Select Protocol, then click Add. Under
Manufacturer, highlight Microsoft. Under Network Protocol, highlight
TCP/IP. Click OK.
Linksys does not provide technical support for Linux, BSD, or other free-
ware, Beta, or open source operating systems. Although many Linksys prod-
ucts have been proven to perform well under Linux and other freeware OSes,
technical support for setup and troubleshooting is not provided. For informa-
tion on where to find device drivers and setup instructions for Linux and
other freeware OSes, visit the support pages and FAQ files on the Linksys
website at www.linksys.com.
47
Linksys Instant EtherFast
®
Series
There may be times when you might need to manually install missing
Windows networking components.
1. Click on Start, Settings, then Control Panel.
2. Double-click the Network icon. The Network window appears.
3. Click on the Configuration tab. Make sure that the following network
components are installed.
• Client for Microsoft Networks
• Linksys EtherFast 10/100 CardBus PC Card II (PCMPC200 v2)
• IPX/SPX-compatible Protocol
• NetBEUI
• TCP/IP
There may be other components listed in addition to the ones shown above. If
any of the above components are missing, add them as follows.
Client for Microsoft Networks
If you plan on connecting to an NT file server or peer-to-peer network, click
on the Add button. Highlight Client and click on Add. Choose Microsoft as
the manufacturer in the Network Client box. Highlight Client for Microsoft
Networks and click OK.
Client for NetWare Networks
If you plan on connecting to a Novell NetWare server, click on the Add but-
ton. Highlight Client and click on Add. In the Network Client window, select
Manufacturer and choose Microsoft. Highlight Client for Microsoft
Networks. Click OK.
IPX/SPX-compatible Protocol
Click on the Add button. Choose Protocol and click on the Add button.
Select Manufacturer and choose Microsoft. Under the Network Protocol box,
highlight IPX/SPX-compatible protocol. Click OK.
46
Linux, Open Source and Beta Operating Systems
Manually Installing Network Components in Windows
95 and 98
N
No
otte
e:: After manually installing a component,
you will be asked to reboot your computer.
D
Do
o n
no
ott reboot until after you have finished
installing all desired components.
