EtherFast
®
10/100 CardBus PC Cards
15. Once the computer has restarted and Windows is up, a Logon window
will appear. Make up a username and password and click OK. Do not click
the Cancel of Esc button, or you won't be able to log onto the network. If the
a logon does not appear or if it does not allow you to log on, refer to
Troubleshooting problem 3 on page 34.
16. Once you are at the Windows 95 desktop, double-click on the Network
Neighborhood icon. You should see an icon for the Entire Network, and/or
the names of the other PCs on the network. In order to see your other com-
puters in Network Neighborhood, you need to enable File and Printer
Sharing. To enable File and Printer Sharing refer to page 37 of this User
Guide.
If you don't see anything at all, press the F5 key on your keyboard a few
times to refresh the screen.
If you only see your computer in Network Neighborhood, skip to
Troubleshooting problem 6 on page 35.
If you only see computers that are running the same operating system as you
and you don’t see any others, go to Troubleshooting problem 10 on page 36.
If you see all computers on the network except yours, and the other PCs can't
see your computer, see Troubleshooting problem 7 in on page 35.
21
Linksys Instant EtherFast
®
Series
12. Optional: Click on the Access Control tab. Make sure that Shared-level
access control is selected. If the setting is on User-Level access control and you
can’t change it, skip to Troubleshooting problem 5 on page 35.
13. Click on the OK button. Your system may or may not ask you for your
Windows 95 CD-ROM or the location of the 95 installation files. Direct
Windows to the appropriate location, (e.g., “D:\win95”, “C:\windows\options\cabs”).
14. Once Windows is done copying the necessary files, the System Settings
Change window appears. Remove all disks from your computer and click on
Yes to restart your PC.
If you don't see this window, simply close down Windows 95 and restart your
computer by clicking on the Start button, then Shut Down, select Restart the
Computer, then click Yes. The installation is complete. Remember to remove
the Driver Disk from the floppy drive.
Look at the EtherFast Card's LEDs. If your cabling is properly attached and
the network is detected, the green Link light will be on, and the Activity
(ACT) light will be flickering or solid.
20
