EtherFast
®
10/100 CardBus PC Cards
8. A list of services will appear. Click Next to approve these services, fol-
lowed by Next again.
9. NT will probably ask you to supply your original Windows NT CD-ROM
or setup disks. If so, place your Windows NT CD-ROM in your CD drive.
If the CD-ROM loads a pop-up window, close it. Type “
D:\i386
” (or
the appropriate CD-ROM drive letter) in the box and click Continue.
10. NT will then display a window containing several setting types. Keep the
default settings unless you know that you need to change them.
After you have made the appropriate settings, click OK.
27
Linksys Instant EtherFast
®
Series
6. The adapter will be added to the list of installed Network Adapters. Click
Next.
7. Place
check marks beside each
listed network protocol that you
wish to install. See your
Microsoft Windows NT user
guide or talk to your network
administrator for more informa-
tion about network protocols.
When you're finished, click
Next.
26
N
No
otte
e:: If you install the T
TC
CP
P//IIP
P p
prro
otto
oc
co
oll, refer
to your system administrator or your
Windows NT documentation when installa-
tion steps that aren’t listed in this User
Guide appear. Linksys does not provide
technical support for the configuration or
troubleshooting of the TCP/IP protocol.
