Linksys EA6900V11 Page 15 User Manual Download

Page: 15 / 61

Setting Up: Basics

Linksys EA-Series

3. Under

Select the type of device to add to your network

, click USB Printer.

The

Add a USB printer

screen opens.

4. Follow the on-screen instructions for downloading and installing the

VUSB (virtual USB) software for your computer.

To connect a wireless printer to your network:
1. Follow the printer’s instructions to connect it to your network. Use the

connection information available in Linksys Smart Wi-Fi or saved to your

computer desktop.

2. After that printer connects to your network, log into Linksys Smart Wi-Fi,

then click Device List to confirm that your router recognizes the new

printer.

How to connect other devices

Many other types of wireless network devices can connect to your home

network, including:

•

Game consoles

•

Internet-capable TVs and media players

•

Digital music players

•

Smart phones

Because of the wide variety of devices and methods of connecting, you must

manually enter network information into the devices for a successful network

connection.

TIP

For more instructions on connecting a game console to your

network, see also:

• “How to optimize your router for gaming and voice” on page 34

• “How to set up port forwarding” on page 43

• “How to set up port range triggering for online gaming” on page

How to manually connect a network device

To manually connect a device to your network:
1. Follow the device’s instructions to connect it to your network. Use the

connection information available in Linksys Smart Wi-Fi or saved to your

computer desktop.

2. After the device connects to your network, log into Linksys Smart Wi-Fi,

then click Device List to confirm that your router recognizes the new

device.

How to connect a network device using Wi-Fi Protected Setup

To connect a device using Wi-Fi Protected Setup™:
1. Plug in and turn on the network device. If the device does not support

Wi-Fi Protected Setup, follow its instructions for a standard network

installation.

2. Log into Linksys Smart Wi-Fi. (See “How to connect to Linksys Smart Wi-

Fi” on page 7.

3. Under Wireless, click the Wi-Fi Protected Setup tab.
4. Use one of the following methods to complete the setup:

Summary of Contents for EA6900V11






























































Search results

Summary of Contents for EA6900V11

Reviews:

Related manuals for EA6900V11

Brands by name

Popular brands

Linksys EA6900V11, User Manual

Search results

Summary of Contents for EA6900V11

Reviews:

Related manuals for EA6900V11

Brands by name

Popular brands