background image

51

Maintaining and Monitoring

Linksys EA-Series

b.  Select a number of times to ping from the Number to ping drop-

down list.

c.  Click Start to Ping. A window opens showing the ping test results. 

You will see a response for each successful ping.

NOTE

If an Internet URL fails to respond to ping, it doesn’t necessarily 

mean that the site is down. For security reasons, some sites are 

configured to not respond to ping requests.

5.  To trace the route that packets take between your router and a specific 

address:
a.  Under Trace route, enter an address in the IP or host name field.

b.  Click Start to Traceroute. A window opens with the test results.

How to configure and use logs

What kind of logging capabilities does my router have? Your router can 

track all traffic for your Internet connection and record that information in a 

log

To enable and view logs:
1.  
Log into Linksys Smart Wi-Fi. (See “How to connect to Linksys Smart Wi-

Fi” on page 7.

2.  Under Router Settings, click Troubleshooting.
3.  Click the Logs tab.

4.  To enable logs, click the Enable Logs button so that ON is displayed.

You can:

 •

View the logs directly in the list

 •

Open the logs in a separate browser window

 •

Print the logs

Summary of Contents for EA6900V11






























































Reviews: