Linksys EA6900V11 User Manual Download

Page: 3 / 61

Contents

Linksys EA-Series

To add your router to an existing router or gateway

To share an Internet connection

To extend your network

How to expose a device to the Internet . . . . . . . . . . . . . . . 41

Port Forwarding and Port Triggering

How to set up port forwarding . . . . . . . . . . . . . . . . . . . . . 43

How to set up port forwarding for a single port

How to set up port forwarding for multiple ports

How to set up port forwarding for a range of ports

How to set up port range triggering for online gaming . . . . . 45

Maintaining and Monitoring

How to back up and restore your router configuration.   .   .   .   .   . 47
How to upgrade the router’s firmware . . . . . . . . . . . . . . . . 48
How to restore factory defaults  . . . . . . . . . . . . . . . . . . . . 48
How to check the status of your router.   .   .   .   .   .   .   .   .   .   .   .   .   .   .   . 49

How to disable the Ethernet port status lights

How to test your Internet connection

How to configure and use logs

Troubleshooting

Your router was not successfully set up . . . . . . . . . . . . . . . 52
Windows XP Service Pack update . . . . . . . . . . . . . . . . . . . 52

Your Internet cable is not plugged in

message . . . . . . . . . . . . 53

Cannot access your router

message . . . . . . . . . . . . . . . . . . 53

After setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

The Internet appears to be unavailable

Linksys Smart Wi-Fi does not open in your web browser

You cannot access Linksys Smart Wi-Fi

All other troubleshooting has been unsuccessful

Specifications

Linksys EA6900 V1.1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

Summary of Contents for EA6900V11






























































Search results

Summary of Contents for EA6900V11

Reviews:

Related manuals for EA6900V11

Brands by name

Popular brands

Linksys EA6900V11, User Manual

Search results

Summary of Contents for EA6900V11

Reviews:

Related manuals for EA6900V11

Brands by name

Popular brands