manualshive.com logo in svg

Linksys BEFVP41 - EtherFast Cable/DSL VPN Router, User Manual, Page: 25 / 63

Share
Download
Linksys BEFVP41 - EtherFast Cable/DSL VPN Router User Manual Download Page 25

EtherFast

®

Cable/DSL VPN Router with 4-Port 10/100 Switch

On the Help screen, shown in Figure 6-27, you will find links to all of the
Utility’s internal support documentation, as well as the application that
upgrades the Router’s firmware. 

Clicking on any of the topics in the bar on the left will give you help informa-
tion about that topic.  

Clicking on the Linksys Website link in the center area will take you to
Linksys’s website, provided you are connected to the Internet.  If the link does
not take you to the Linksys website, you may alternately type www.linksys.com
in the address bar at the top of the screen.

Clicking on the Online manual in PDF format link will take you to the latest
version of the manual for this product.  The manual will be in Adobe Acrobat
Portable Document File (.pdf) format.  You will need the Adobe Acrobat Reader
to view this version of the manual.  If you do not have the Acrobat Reader, click
on the Adobe Website link to get it.

For instructions on upgrading the Router’s firmware, see the next page.

Help

Figure 6-27

The Log tab, shown in Figure 6-26, provides you with a log of all incoming and
outgoing URLs or IP addresses for your Internet connection.

The Log feature provides you with a log of all incoming and outgoing URLs or
IP addresses for your Internet connection.  The Logviewer keeps track of all
incoming and outgoing activity that can be saved in a text file.  The IP address
points to the location where Logviewer is running.

The Outgoing Access Log lists all the URLs or IP addresses of Internet sites
that users on your network have accessed, and the Incoming Access Log gives
you a log of all incoming Internet traffic.

This data can also be accessed by other network users if the file is shared. 

Access Log  To activate logging, click the Enable button.

Send Log to  Enter in the IP address of the PC that you want to send the log to
(where your PC is running Logviewer).  Make sure that this PC is using a stat-
ic IP address. Click the Apply button and then the Continue button when
you’re done. You may download the Logview software at www.linksys.com.

Click on Outgoing Access Log or Incoming Access Log to view each log.

To disable Logging, click on Disable in the Log window, and then click the
Apply button and the Continue button.

Log

Figure 6-26

Instant Broadband

®

Series

43

42

Summary of Contents for BEFVP41 - EtherFast Cable/DSL VPN Router
































































Reviews:

No comments