manualshive.com logo in svg

Linksys BEFVP41 - EtherFast Cable/DSL VPN Router, User Manual, Page: 53 / 63

Share
Download
Linksys BEFVP41 - EtherFast Cable/DSL VPN Router User Manual Download Page 53

EtherFast

®

Cable/DSL VPN Router with 4-Port 10/100 Switch

99

Instant Broadband

®

Series

98

6. Find and double-click TCP/IP in the list to the right in Figure F-2.

7. After a few seconds you will be brought back to the main Network window.

The TCP/IP Protocol should now be listed. 

8. Click  OK. Windows may ask for original Windows installation files.

Supply them as needed (e.g.: c:\windows\options\cabs., D:\win98,
D:\win95, D:\win9x, etc.)

9. Windows will ask you to restart the PC. Click Yes. 

The TCP/IP Installation is complete.

Figure F-3

Figure F-2

Appendix F: Installing the TCP/ I P

Protocol

the TCP/IP Protocol

Follow these instructions to install the TCP/IP Protocol on one of your PCs
only after a network card has been successfully installed inside the PC. These
instructions are for Windows 95, 98, and Millennium. For TCP/IP setup under
Windows NT, 2000, or XP, please refer to your Windows documentation.

1. Click the Start button. Choose Settings, and then Control Panel.

2. Double-click the Network icon. Your Network window should pop up.

Select the Configuration tab.

3. Click the Add button.

4. Double-click Protocol.

5. Highlight Microsoft under the list of manufacturers.

Figure F-1

Summary of Contents for BEFVP41 - EtherFast Cable/DSL VPN Router
































































Reviews:

No comments