Linertec LTS-200 Series, Instruction Manual

Page: 27 / 76

24
3.6 Target sighting
[Target sighting by Manual focus]
①
Loosen the telescope clamp and horizontal clamp screws.
②
Point the telescope at the target using a collimator.
③
Tighten the above two screws.
④
Adjust the eyepiece.
⑤
Look through the telescope and then rotate the Focus ring and stop it where the target can
be clearly seen and the target image does not move in relation to reticle even if your eye is
vertically and horizontally moved.
⑥
Align the reticle accurately on the target using telescope and horizontal tangent screws.
• The Focus ring rotation “clockwise” makes it possible to focus on closer objects and
“counter clockwise” will focus on further objects.
Collimator
Collimator
Target
Focus Ring
Target sighting