Linertec LTS-200 Series, Instruction Manual

Page: 15 / 76

12
1.3 Unpacking and packing
[Unpacking the Instrument from the case]
①
Set the case down gently with the lid facing upwards.
②
Open the latches while pressing down on the lock (safety mechanism)
and open the lid of the case.
③
Remove the instrument from the case.
[Packing the instrument in the case]
①
Make sure the telescope is fairly levelled and lightly tighten the telescope clamp screw.
②
Line up the housing marks (round yellow marks on the instrument) and tighten the upper
and lower clamp screws.
③
With the housing marks are facing upwards, set the instrument gently in the case without
forcing it. Close the lid to the case and secure the latches.
1.4 Removing and attaching the Battery
[Removing the Battery]