Linertec LTS-200 Series, Instruction Manual

Page: 71 / 76

68
13.2 The following labels are affixed to and must remain
Attached to this laser product.
WARNING
Do not stare into the laser beam directly as this may result in damage to your eyes.
LTS-200 is a Class IIIa (3R) Laser product. Do not look into the laser radiation aperture
directly as this may result in damage to your eyes.
Never use the telescope to view intense light such as direct sunlight or sunlight reflected
through a prism as this may result in loss of sight.
A) The following Certification label is located near the Plate level: “This laser product is
complied with the provisions of 21 CFR 1040. 10 and 1040.11. For a Class IIIa laser
product.”
B) Caution label is located near the exit aperture: “AVOID EXPOSURE. Laser radiation
is emitted from this aperture.”
C) Warning logotype is located on the surface of the telescope: “CAUTION LASER
RADIATION DO NOT STARE INTO BEAM”
D) Warning label is located near the exit aperture.
13.3 Caution to maintain the safety in compliance with the
standard
A) To maintain the safety standard, refrain from any operation, maintenance, or
adjustment other than described in this instruction manual.
B) Operation, maintenance or adjustment other than those specified in this instruction
manual may result in hazardous radiation exposure.
C) Maintenance and repair not covered in this manual must be done by an authorized
LINERTEC dealer.
D) The Laser beam emission by the Distance measurement can be terminated by Pressing
[ESC] key.