19
3-3. Default IP address
As a factory setting, DHCP client mode and AutoIP function automatically set IP address.
* When the IP address is 0.0.0.0 (factory setting), those functions are valid. When IP
address is 0.0.1.0, only DHCP client function is valid.
When having DHCP server in the network
IP address is automatically set from the DHCP server when turning on the power
of device.
When not having DHCP server in the network
One of the IP addresses of "169.254.01" to "169.254.255.1" is automatically set by the
AutoIP function when turning on the power of device.
Refer to "Chapter 3.4"
3-4. Usage of DeviceInstaller
Install the DeviceInstaller of Lantronix for setting the IP address.
Preparation: Log to the PC as administrator. If you had already installed the previous
version of DeviceInstaller, uninstall it.
*
If you would like to use the converter with XPort firmware Ver.1.8, used the previous
version of DeviceInstaller. The latest XPort firmware is displayed as "Unknown:x5"
or "Unknown:x9".
1 Double click on "setup_di_x86x64cd_4.4.0.0.exe" in the "/lantronix/DeviceInstaller/
ver4.4.x.x" folder. If you find the latest version in the CD-ROM, use the latest
version.
2 Install it following the wizard.
* OS for DeviceInstaller(v4.4.x.x): Windows x86: XP/ 2003 Server/ Vista/ 7/ 8/ 2008
Server Windows x64: vista/ 7/ 8/ 2008 Server
* If the PC is connected to the Internet,".NET Framework" is automatically installed.
Refer to the "Release.txt" file in the CD-ROM for information of ".NET Framework"
version.
