Connecting Readers, Inputs, Outputs, and Temperature Sensors
233190 X3 Linear LLC
13
May 2013
Wire specification
: Twisted, shielded 22 AWG Belden #9536 (6 conductor)
or equivalent. Maximum distance: 500 feet (152 meters).
6.
Connect the reader wires to the 7-pin reader connector provided, as shown in
the following diagram.
Figure 7. The 7-pin reader connector.
Note
: Refer to the documentation provided by the reader manufacturer for
LEDs and Bpr (Beeper) wire colors.
7.
Be sure there is no power to the system.
8.
Plug the connector into a reader position on the access control blade.
Connecting Readers
CAUTION
: Make sure all power is off before connecting any reader to a
blade.
Access control blades have two, 7-pin reader connectors mounted on the blade,
as shown in the following figure.
Figure 8. The two 7-pin reader connections on the access control blade.
Bpr
Grn LED control
Red LED control
D1
(white)
D0
(green)
Gnd
(black)
Pwr
(red)
