Lindab UltraLink FTCU, Technical Information

Page: 23 / 24

23 Lindab reserves the right to make changes without prior notice
2020-08-05
UltraLink Controller FTCU
lindab | we simplify construction
Addr
ess
UltraLink ®
Name Description Data type Unit Div Default Min Max Access FTCU FTMU
4x430 X X Analog Output 2 Level
Conf. Analog output config:
0 = 0-10 V,
1 = 10-0 V,
2 = 2-10 V,
3 = 10-2 V. 16bit 2 0 3 RW
4x431 X X Analog Output 2 Unit Conf. Show:
0 = Flow
1 = Temperature
2 = Angle 16bit 2 0 2 RW
4x432 X X Analog Output 2 Temp.
Min. Min temperature shown = Min output voltage
(Only relevat when 4x431 is set to 1 ) 16bit ºC 0 -40 50 RW
4x433 X X Analog Output 2 Temp.
Max. Max temperature shown = Max output volta-
ge (Only relevant when 4x431 is set to 1 ) 16bit ºC 50 -40 50 RW
4x434 X X Analog Output 2 Flow Min. Min flow shown = Min output voltage (Only
relevant when 4x431 is set to 0 ) 16bit l/s 0 -4700 4700 RW
4x436 X X Analog Output 2 Flow Max. Max flow shown = Max output voltage (Only
relevant when 4x431 is set to 0 )
16bit l/s * -4700 4700 RW
4x438 X Analog Output 2 % Open
Min. Min open % shown = Min output voltage Only
relevant when 4x431 is set to 2 ) 16bit % 10 0 0 1000 RW
4x439 X Analog Output 2 % Open
Max. Max open % shown = Max output voltage
(Only relevant when 4x431 is set to 2 ) 16bit % 10 1000 0 1000 RW
Analog input (Settings below are only relevant when register 4x071 is set to 1)
4x500 X Analog In Level Conf. Analog input:
0 = 0-10 V,
1 = 10-0 V,
2 = 2-10 V,
3 = 10-2 V. 16bit 2 0 3 RW
4x501 X Analog In Angle Minimum Min angle = min voltage 16bit % 0 0 100 RW
4x502 X Analog In Angle Maximum Max = max voltage 16bit % 100 0 100 RW
4x503 X Analog In Flow Minimum Min flow = min voltage
(Must be equal or higher than register 4x315) 16bit l/s 0 0 4700 RW
4x504 X Analog In Flow Maximum Max flow = max voltage
(Must be equal or lower than register 4x316) 16bit l/s * 0 4700 RW
4x510 X Analog In Override Low
Trigger Min. Lowest voltage level to activate 1st Override
level
(Only relevant when 4x500 is set to 2 or 3) 16bit V 10 0 0 20 RW
4x511 X Analog In Override Low
Trigger Max. Highest voltage level to activate 1st Override
level (Only relevant when
4x500 is set to 2 or 3) 16bit V 10 8 0 20 RW
* = the value depends on the dimension of the product.