14
Lindab reserves the right to make changes without prior notice
2020-08-05
Lindab reserves the right to make changes without prior notice
2020-08-05
Lindab reserves the right to make changes without prior notice
2020-08-05
UltraLink Controller
FTCU
lindab | we simplify construction
Configuration menu structure
The configuration menu is activated by long pressing the button (5 sec). After long pressing the button a new menu will
appear with three different options;
• Con.Set
(Connection settings)
• AIn.Set
(Analog In settings)
• Cancel
(Cancel and return to information menu)
You can toggle between the three options by short pressing the button. Select the option you want and long press to pro-
ceed down in the menu structure.
Under Con.Set (connection settings) you can find the following options (toggle with short press, select with long press);
Menu tag
Description
Options
Description
• Pr.
Protocol
Pr.PAS
Pr.Mod
Pascal protocol
Modbus
• b.
Baud rate
b.9600
b.19200
b.38400
b.76800
Baud rate 9600
Baud rate 19200
Baud rate 38400
Baud rate 76800
• bit.
Stop bits
bit.1
bit.2
1 stop bits
2 stop bits
• P.
Parity
P.odd
P.even
P.none
Odd parity
Even parity
Parity none
• Id.
Modbus Id
Id.x
Modbus id (x = value) *)
• PLA.
PLA address for Pascal
PLA.x
PLA address (x = value) *)
• ELA.
ELA address for Pascal
ELA.x
ELA address (x = value) *)
• Pi.
Pin-code
Pi.xxxx
Default: xxxx = 1111
• Cnt.
Control by bus
Cnt.bus
Cnt.AIn
Control by bus
Control by analog in
• Store
Store changes
Strores changes on long press
• Cancel
Cancel
Cancel and ignore changes on long press
Menu tag
Description
Options
Description
• qH.
Max flow (l/s)
qH.x
Maximum air flow (x = value) *)
• qL.
Min flow (l/s)
qL.x
Minimum air flow (x = value) *)
• r.
Voltage range
r.0-10
r.10-0
r.2-10
r.10-2
Voltage range 0-10V
Voltage range 10-0V
Voltage range 2-10V
Voltage range 10-2V
• Store
Store changes
Stores changes on long press
• Cancel
Cancel
Cancel and ignore changes on long press
Under AIn.Set (analog in settings) you can find the following options (toggle with short press, select with long press).
*) To change the value you need to long press until a blinking cursor appears under the first single number in the current
value. After that you short press to toggle to the desired number, then you long press to move the blinking cursor to the
next single number in the current value. Proceed until the new value has been set and long press to continue.
