9
Ékszíjas meghajtású, olajkenésű, dugatt
LINCOS Slovenia
STD-3550
Two Post Lift - Electrical Release
WARNING: THE WIRING MUST COMPLY WITH LOCAL CODE. HAVE A
CERTIFIED ELECTRICIAN MAKE THE ELECTRICAL HOOK UP TO THE POWER
UNIT.
4 OPERATION
WARNING: DO NOT PLACE ANY VEHICLE ON THE LIFT BEFORE TRIAL
OPERATION. CYCLE THE UP AND DOWN SEVERAL TIMES TO ENSURE
LATCHES CLICK TOGETHER AND AIR IS REMOVED FROM THE CYLINDERS.
BEFORE OPERATION
a. Check all the pipelines and joints before use. The machine only can be used after
there is not any leakage.
b. The lift, if its safety device malfunctions, shall not be used.
c. The machine shall not lift or lower an automobile if the centre of gravity of
automobile is not within the supporting range of the supporting device. Otherwise,
the manufacturer will not bear any responsibility for the consequence resulted
from the operation above mentioned.
d. The staff or operators shall be in a safe position when the machine lift or lower.
e. Raise and lower several times to make sure no air in the cylinder. Air inside of the
cylinder makes raising not smoothly.
INSTRUCTIONS FOR USE
A) RAISING THE LIFT
Make sure that you have read the operation
1.
Manual before operation.
2.
Always lift the vehicle at the manufacturer
recommended points.
3.
Position the vehicle between columns
4.
Adjust the swing lift arms so that the vehicle is
positioned with the centre of gravity of midway
between pads.
5.
Raise the lift by pressing the push button on control
box until the pads touch firmly the right points and
recheck if the vehicle is secure.
