Subject to modifications
Owner’s Manual
Operating Instructions and Spare Parts Lists
Page 5 of 14
1.2A-28001-C05
LINCOLN GmbH & Co. KG • Postfach 1263 • D-69183 Walldorf • Tel +49 (6227) 33-0 • Fax +49 (6227) 33-259
VSG/VSL Idendification Chart
Examples of type designations:
VSG
2 - D 1,1
VSL 8 - KR FKM protection cap MS
VSG
6
KR
-
NP
VSG
VA 3 - KR
VA
VSG
4 - KR
-
KNTU - A
VSG
1 - MR
VSL
8 - KR
-
KSC
Basic type
G : Max. output volume 2,2 cm³
L : Max. output volume 5 cm³
Standard version
Steel body, galvanized
VA : stainless body 1.4305
Number of outlets 1 to 8
Adjusting of output and monitoring
KR : with indicator pin and progressive adjustment
KD : with indicator pin and metering screws
D : with metering screws (output volume in cm³)
MR: adjustment with magnetically operated indication
Adjusting:
Standard version: steel, galvanized
VA
: stainless steel 1.4305
FKM : adjustment with FKM seal (over 80°C)
(standard: polyurethane)
KN
: with indicator pin and progressive adjustment
as well as fitted proximity switch per pair
of outlets
KA
: with indicator pin and adapter
(proximity switch to be supplied by customer)
KS
: with indicator pin and progressive adjustment
as well as fitted limit switch per pair of outlets
NP
: with integrated proximity switch
(piston detector)
Protection cap MS: Protection cap brass
C,TU : internal abbreviations
A
: USA-version (NPT thread)
Note: The metering devices model D and KD are supplied
with metering screws for maximum output (2.2 or 5 cm
3
)
when no other specification is indicated.
