Subject to modifications
LINCOLN GmbH • Postfach 1263 • D-69183 Walldorf • Tel +49 (6227) 33-0 • Fax +49 (6227) 33-259
Page 5 of 12
User Manual
Operating Instructions
2.6EN-20005-E09
Mode of Operation
PCB 5
Shock sensor
200024 50a
Pumps with in tegrated control p.c.b.s H are workin g ac-
co rding to operatin g cycles (Pause time + lubricating time,
se e Fig. PCB 6).
The control p.c.b. takes over during the t ravelling motio ns
the sequence of pause and lubricating times of the cen-
tralize d lubrication pump.
The pump supplies lubricant only during braking ope ration s
to the connected lub rications poin ts.
6001 a02
NOTE
Shock se nsors of prior control p.c.b.s con-
t ain mercury (Fig . PCB 5).
Ne w control p.c.b.s are equipped with
shock sensor with another design (meta l
h ousing incl. a mobile pellet inside).
The electronic unit con verts the incoming imp ulses into
running times which correspond to the switching on and off
of the driving switch.
Commissioning
PCB 4
Control p.c.b. H, part no. 236-13857-1
200024 40a
Comp ared to the commissioning of tractor units (stand-by
time via extern al contact, e. g. drivin g witch) th e collection
of operating times of pumps with control p.c.b.s H
(Fig. PCB 4) is attended via the shock sen sor (Fig. PCB 5).
