Subject to modifications
Page 4 of 32
LINCOLN GmbH • Postfach 1263 • D-69183 Walldorf • Tel +49 (6227) 33-0 • Fax +49 (6227) 33-259
User Manual
Operating Instructions
2.1EN-38016-C09
Introduction
Explanation of Symbols Used
The following des cription standards are used in this manual:
Safety Instructions
Structure of safety instructions:
Pictogram
Signal
word
Danger
text
- Danger note
- How to avoid danger
The following pic tograms are used in this m anual and are
combined with the corresponding signal words:
1013A94
4273a00
600 1a02
- ATTENTION
- CAUTION
- WARNING
- ATTENTION
- CAUTION
- WARNING
- NOTE
- IMPORTANT
The signal words give the seriousness of danger if the follow-
ing text is not observed:
ATTENTION
refers to faults or damages on
machines.
CAUTION
refers to bad dam ages and possi-
ble injuries.
WARNING
refers to possible dangerous inju-
ries .
NOTE
indicates improved operation of the
device.
IMPORTANT
indicates special operating fea-
tures of the device.
Example:
1013A 94
ATTE NTION!
When making use of other than the tes ted
spar e parts, serious damage may affect
your device.
Therefore, for the operation of your device
always use original parts made by Linc oln
GmbH.
Furthermore, you will find the following text sy mbols in this
manual:
Listing of applic able statements
- Subpoint of applicable statements
1. Determination of the number or sequence of contents
Procedural instruction
User's Responsibility
To ensure the safe operation of the unit, the user is responsi-
ble for the following:
1.
The pump / system s hall be operated only for the in-
tended use (see next chapter "Safety Instructions") and
its design shall neither be modified nor transformed.
2.
The pump / system s hall be operated only if it is in a
proper functioning condition and if it is operated in accor-
dance with the maintenance requirements.
3.
The operating personnel m ust be familiar with this Owner
Manual and the safety instructions mentioned within and
observe these carefully.
The c orrect installation and connection of tubes and hoses , if
not s pecified by Lincoln GmbH, is the user's responsibility.
Lincoln GmbH will gladly assist y ou with any questions per -
taining to the installation.
Environmental Protection
Was te (e.g. used oil, detergents , lubricants) m ust be dis-
posed of in accordance with relevant environm ental regula-
tions.
Service
The personnel responsible for the handling of the pump /
system must be suitably qualified. If required, Lincoln GmbH
offer s you full service in the form of advice, on-site installation
assistance, training, etc. We will be pleased to inform you
about our possibilities to support you purposefully.
In the event of inquiries pertaining to maintenance, repairs
and spare parts, we require model specific data to enable us
to clearly identify the com ponents of your pum p / sys tem.
Therefore, always indicate the part, model and series number
of your pump / system.
