Lincoln Navigator 2004 Owner'S Manual Download Page 272

Page: 272 / 385

Engine

Rear axle

ratio

Maximum

GCWR - lbs.

(kg)

Trailer weight range
(0 - maximum) - lbs.

(kg)

4x2

5.4L with

standard

trailer tow

package

All

11900 (5397)

0–6000 (0–2721)

5.4L with

optional trailer

tow package

All

14500 (6576)

0–8600 (0–3900)

4x4

5.4L with

standard

trailer tow

package

All

12200 (5533)

0–6000 (0–2721)

5.4L with

optional trailer

tow package

All

14500 (6576)

0–8300 (0–3764)

Note:

For vehicles not equipped with the optional trailer tow package,

the maximum frontal area of trailer should not exceed the frontal area
of the vehicle.

Note:

For vehicles equipped with the optional trailer tow package, the

maximum frontal area of trailer should not exceed 60 square feet (5.6
square meters).

Do not exceed the maximum loads listed on the Safety Compliance
Certification label. For load specification terms found on the label, refer
to

Vehicle loading

in this chapter. Remember to figure in the tongue

load of your loaded trailer when figuring the total weight.

Towing trailers beyond the maximum recommended gross trailer
weight exceeds the limit of the vehicle and could result in

engine damage, transmission damage, structural damage, loss of
control, vehicle rollover and personal injury.

2004 Navigator

(nav)

Owners Guide (post-2002-fmt)
USA English

(fus)

Driving

271

Summary of Contents for Navigator 2004


































































































































































































































































































































































































Search results

Summary of Contents for Navigator 2004

Reviews:

Related manuals for Navigator 2004

Brands by name

Popular brands

Lincoln Navigator 2004, Owner'S Manual

Search results

Summary of Contents for Navigator 2004

Reviews:

Related manuals for Navigator 2004

Brands by name

Popular brands