manualshive.com logo in svg

Lincoln Navigator 2004, Owner'S Manual

The Lincoln Navigator 2004 Owner's Manual is an essential guide for maintaining and operating your vehicle. Download the manual for free from manualshive.com to access valuable information on features, troubleshooting, and maintenance for this luxurious SUV. Ensure you have the information you need to get the most out of your Navigator.

Share
Download
background image

Do not sit on top of a buckled safety belt to avoid the Belt
Minder

娂

chime. Sitting on the safety belt will increase the risk

of injury in an accident. To disable (one-time) or deactivate the Belt
Minder

娂

feature please follow the directions stated below.

One time disable

Any time the safety belt is buckled and then unbuckled during an
ignition ON cycle, BeltMinder

娂

will be disabled for that ignition cycle

only.

Deactivating/activating the BeltMinder

姟

feature

Read steps 1 - 9 thoroughly before proceeding with the
deactivation/activation programming procedure.

The BeltMinder

娂

feature can be deactivated/activated by performing the

following procedure:

Before following the procedure, make sure that:

•

The parking brake is set

•

The gearshift is in P (Park) (automatic transmission)

•

The ignition switch is in the OFF position

•

All vehicle doors are closed

•

The driver’s safety belt is unbuckled

•

The parklamps/headlamps are in OFF position (If vehicle is equipped
with Autolamps, this will not affect the procedure.)

To reduce the risk of injury, do not deactivate/activate the
BeltMinder

娂

feature while driving the vehicle.

1. Turn the ignition switch to the RUN (or ON) position. (DO NOT
START THE ENGINE)

2. Wait until the safety belt warning light turns off. (Approximately 1–2
minutes)

•

Steps 3–5 must be completed within 60 seconds or the procedure will
have to be repeated.

3. Buckle then unbuckle the safety belt three times, ending with the
safety belt unbuckled. This can be done before or during BeltMinder

娂

warning activation.

4. Turn on the parklamps/headlamps, turn off the parklamps/headlamps.

2004 Navigator

(nav)

Owners Guide (post-2002-fmt)
USA English

(fus)

Seating and Safety Restraints

208

Summary of Contents for Navigator 2004


































































































































































































































































































































































































Reviews:

No comments

Related manuals for Navigator 2004

M7 SPEED R56 Installation Manual preview
R56
Brand: M7 SPEED Pages: 11
BGS technic 40108 Manual preview
40108
Brand: BGS technic Pages: 5
Oldsmobile 1999 88 Owner'S Manual preview
1999 88
Brand: Oldsmobile Pages: 344
ABL eMH3 Installation Manual preview
eMH3
Brand: ABL Pages: 66
P-Invent Troller User Manual preview
Troller
Brand: P-Invent Pages: 4
FALCON RIDGE BC-3400-FC05 Instructions For Installation And Care preview
BC-3400-FC05
Brand: FALCON RIDGE Pages: 7
Volvo 2004 C70 HPT User Manual preview
2004 C70 HPT
Brand: Volvo Pages: 30
walser ULTIMATE SPEED 296713 Assembly And Safety Advice preview
ULTIMATE SPEED 296713
Brand: walser Pages: 10
Mercedes-Benz 2009 E-Class Manual preview
2009 E-Class
Brand: Mercedes-Benz Pages: 373
NavInc CP-PEU-GV3 Manual preview
CP-PEU-GV3
Brand: NavInc Pages: 6
E&G Classics Denali 1094-0185-15 Instruction Manual preview
Denali 1094-0185-15
Brand: E&G Classics Pages: 3
Metra Electronics 99-7803G Wiring Instructions preview
99-7803G
Brand: Metra Electronics Pages: 2
Safe Fleet PRIME DESIGN HRR3-E-PM42 Manual preview
PRIME DESIGN HRR3-E-PM42
Brand: Safe Fleet Pages: 12
N.R. AUTOSEATS Top User Manual preview
Top
Brand: N.R. AUTOSEATS Pages: 8
Roadmaster 195125 Assembly And Operating Instructions preview
195125
Brand: Roadmaster Pages: 4
RBO IT FITS RBO1018 Product Manual preview
IT FITS RBO1018
Brand: RBO Pages: 36
Butts of Bawtry TBT4700 Quick Start Manual preview
TBT4700
Brand: Butts of Bawtry Pages: 2
Belkin LineCast Auto FM User Manual preview
LineCast Auto FM
Brand: Belkin Pages: 15

Brands by name

Popular brands

Load more brands