Setting the clock:
Your vehicle is equipped with a separate analog
clock. Refer to
Setting the clock
in the Driver Controls Chapter.
11.
AUTOSET:
Press to set first six
strong stations into AM, FM1 or
FM2 memory buttons; press again to
return to the original preset
stations. If there are less than six strong stations available on the
frequency band, the remaining memory preset controls will all store the
last strong station available.
12.
SCAN:
Works in radio, tape and
CD modes. Press SCAN for a brief
sampling of radio stations, tape
selections or CD tracks. Press again to deactivate scan mode.
13.
SEEK:
Works in radio, tape and
CD modes. Press to access the
previous
or next
listenable
radio station, tape selection or CD track.
14.
TUNE:
Works in radio mode.
Press
/
to manually advance
down/up the frequency band.
15.
AM/FM/CD:
Press AM/FM to
select a radio frequency. Press while
in tape or CD mode to return to
radio mode. Press CD to enter CD mode and to play a CD already in the
system. Press AM/FM to switch between AM, FM1, or FM2 memory
preset stations. Press the CD control to toggle between CD and DVD (if
equipped).
16.
Power/volume:
Press to turn
the system on/off. Turn to
raise/lower the volume.
If the volume is set above a certain
level and the ignition is turned off,
the volume will come back on at a
“nominal” listening level when the ignition switch is turned back on.
Audio power can also be turned on by pressing the AM/FM select control
or the TAPE/CD select control.
2004 Navigator
(nav)
Owners Guide (post-2002-fmt)
USA English
(fus)
Entertainment Systems
19
