3. Obtain the spare tire and jack
from their storage locations. Turn
off the air suspension switch (the
air suspension switch is located
behind a trim panel on the left rear
quarter trim panel. Refer to
Air
Suspension System
in the
Driving
section for more information.). Also,
turn OFF the deployable running
boards (if equipped. See
Message
center
in the
Driver controls
section).
4. Use the tip of the jack handle to
remove any wheel trim. Loosen each
wheel lug nut one-half turn
counterclockwise but do not remove
them until the wheel is raised off
the ground.
5. Position the jack according to the
jack locator arrows found on the
frame and turn the jack handle and
extension tool assembly clockwise.
Note:
Use the frame rail as the
jacking point, NOT the control arm.
6. Lift the vehicle so the tire is no
further than 1 inch (2.5 cm) off the
ground when installing the spare tire.
2004 Navigator
(nav)
Owners Guide (post-2002-fmt)
USA English
(fus)
Roadside Emergencies
292
