Note:
Modification of the vehicle ride height (e.g. using much larger
tires) may degrade feature performance.
A camera sensor is centrally mounted behind the windshield of the
vehicle, and monitors the conditions to decide when to switch the high
beams off and on.
Once the system is active the high beams will switch on if:
•
The ambient light level is low enough that high beams are needed.
•
There is no traffic in front of the vehicle.
•
Vehicle speed is greater than 32 mph (52 km/h).
•
Severe weather is not detected.
The high beams will switch off if:
•
An approaching vehicle’s headlights or a preceding vehicle’s tail lamps
are detected.
•
The vehicle speed falls below 27 mph (44 km/h).
•
The ambient light level is high enough that high beams are not
needed.
•
Severe rain, snow or fog is detected.
•
The camera is blocked.
Activating the system
Switch the system on within the information display. See
Information
displays
.
Turn the lighting control to the
autolamps position.
A
Lighting
97
2015 MKT
(mkt)
Owners Guide gf, 1st Printing, October 2014
USA
(fus)
