INSTRUMENT LIGHTING DIMMER
•
Tap the top or bottom of the control to brighten or
dim all interior lit components incrementally.
•
Press and hold the top of the control to activate the
“dome on” feature. This will turn on the interior
courtesy lights. Fully press and hold the bottom of the
control to turn off the interior courtesy lights.
HEADLAMP EXIT DELAY
You can set the delay time to keep the headlamps on for up to three
minutes after the ignition is turned off.
Follow the steps below to change the delay time (Steps 1 through 6
must be done within 10 seconds):
1. Turn the ignition off.
2. Turn the lighting control to the autolamp position.
3. Turn the lighting control to the off position.
4. Turn the ignition on.
5. Turn the ignition off.
6. Turn the lighting control to the autolamp position. The headlamps and
parking lamps will turn on.
7. Turn the lighting control to the off position when the desired delay
time has been reached. The headlamps and parking lamps will turn off.
You can set the headlamp exit delay to one of the following settings:
•
Off
•
10 seconds
•
20 seconds
•
120 seconds
Note:
You can also adjust the time delay using the display controls in
the instrument cluster. See the
Information Displays
chapter.
Lighting
95
2015 MKT
(mkt)
Owners Guide gf, 1st Printing, October 2014
USA
(fus)
